Energy is in high demand and the there are problems with every method of acquiring it. Most believe that oil is not the answer. Coal poses environmental problems. Nuclear has demonstrated potential for danger. Clean energy such as hydro, wind, and solar pose cost concerns. Many have pointed to natural gas as the middle ground, the compromise between clean and “dirty” energy sources that may be the direction to take.
Is it safe enough?
This graphic by our friends at 1bog asks the question and attempts to answer it.
Note: 1bog clearly supports solar as the solution, so their views are biased, but the facts associated with natural gas do tend to point to the same conclusions that they make. Is it the answer?
Click to enlarge.
Allenbrothers
THis is serious and REAL and the US goverment has been working on oit for 10 years.
Please take 15 min and explore the link provided
Rossi has given three demonstrations so far including with professors from Bologna University and the Swedish skeptics society and the Chairman of the Swedish Physics Union. This is a link to the LENR site where detailed information about cold fusion efforts is available. http://www.lenr-canr.org/News... The US Naval Research lab has been working on this with positive results for over 10 years. Yet the major scientific magazines refuse to touch this issue since it was purportedly discredited by some researchers and an institution that stood to lose 10s of millions in funding per year in hot fusion. This This funded hot fusion system has never produced surplus energy after billions have been spent and years of research.
Rossi has announced a 1MW Cold Fusion facility to be opened in Greece this Oct. Yet top line periodicals have yet to publish even one article. This will change the economics of the world lifting many people out of poverty and it will also threaten many vested interests.
FROM LENR-News
Rossi 6-hour demonstration convinces Swedish experts
April 2011
On March 29, 2011, a test of a smaller Rossi device was performed. It was attended by two new observers: Hanno Essén, associate professor of theoretical physics and chairman of the Swedish Skeptics Society, and Sven Kullander, chairman of the Royal Swedish Academy of Sciences’ Energy Committee. They agree with other independent observers that the device must be producing a nuclear reaction. See NyTeknik: Swedish physicists on the E-cat: “It’s a nuclear reaction.”
This test employed a new, smaller device with a 50 cm3 cell. It produced ~4.4 kW for 6 hours, or 25 kWh (90 MJ).
Essén and Kullander wrote a report, also in NyTeknik, Experimental test of a mini-Rossi device at the Leonardocorp, Bologna 29 March 2011. Focardi gave a revealing radio interview. Here is an English translation.
NyTeknik has published a number of articles about Rossi. They are all listed here. The New Energy Times is keeping a close watch on news articles about Rossi. They have a list of articles here.
Plans to begin commercial cold fusion reactor production this year
March 2011
A company has been formed in Athens, Greece, Defkalion Green Technologies S. A., for the purpose of manufacturing and selling Andrea Rossi Energy Catalyzer cold fusion reactors. According to the Greek newspaper “Investor’s World” and other sources, the company is capitalized at €200 million, which includes €100 million to be paid in as royalties, presumably to Rossi. The Greek press says the company plans to manufacture 300,000 machines a year for the Greek and Balkan market. The company website says it has exclusive rights to sell the machines everywhere except the Americas.
http://www.lenr-canr.org/News...
Rossi has announced that he is fabricating a 1 MW reactor to produce hot water (not steam or electricity), scheduled for October 2011. He is building the machine in Florida before shipping it to the Defkalion factory. It will consist of 100 small devices similar to the one demonstrated at U. Bologna.
We have uploaded a new paper from Scott Chubb describing the Rossi device and recent events about it.
Rossi 18-hour demonstration
February 2011, updated March 2011
On February 10 and 11, 2011, Levi et al. (U. Bologna) performed another test of the Rossi device. Compared to the January 14 test, they used a much higher flow rate, to keep the cooling water from vaporizing. This is partly to recover more heat, and partly because Celani and others criticized phase-change calorimetry as too complicated. There were concerns about the enthalpy of wet steam versus dry steam, and the use of a relative humidity meter to determine how dry the steam was. A source close to the test gave Jed Rothwell the following figures. These are approximations:
Duration of test: 18 hours
Flow rate: 3,000 L/h = ~833 ml/s.
Cooling water input temperature: 15°C
Cooling water output temperature: ~20°C
Input power from control electronics: variable, average 80 W, closer to 20 W for 6 hours
The temperature difference of 5°C * 833 ml = 4,165 calories/second = 17,493 W. Observers estimated average power as 16 kW. A 5°C temperature difference can easily be measured with confidence.
3,000 L/h is 793 gallons/h, which is the output of a medium-sized $120 ornamental pond pump.
The control electronics input of ~80 W is in line with what was reported for tests before Jan. 14. Input power was high on that day because there was a problem with cracked welding, according to the Levi report.
18 hours * 16 kW = 288 kWh = 1,037 MJ. That is the amount of energy in 26 kg of gasoline (7.9 gallons). Given the size and weight of the device, this rules out a chemical source of energy.
NyTeknik published a fascinating description of the latest experiment (in English). This includes new details, such as the fact that the power briefly peaked at 130 kW. NyTeknik also published an interview with two outside experts about the demonstration: Prof. Emeritus at Uppsala University Sven Kullander, chairman of the National Academy of Sciences Energy Committee, and Hanno Essén, associate professor of theoretical physics, Swedish Royal Institute of Technology. Two versions are available, in English and Swedish.
On March 3, Rossi conducted an informative on-line chat with NyTeknik readers.
Rossi and U. Bologna have announced that tests on the device will continue for a year